Axial buying guide: models, parts and compatibility
October 8, 2026
Axial: Built for the Trail, Built to Be Modified
Axial turned rock crawling from a homebrew corner of the hobby into something you could buy, run, and upgrade with a real catalog behind it. Where a vintage racing brand is about preserving a generation, Axial is about a platform: axles, transmissions, links, and chassis rails designed to be mixed, stretched, and rebuilt into something personal, with one of the deepest upgrade ecosystems in RC behind it.
That suits the tinkerer, the scale builder, and the trail driver who wants a truck that looks and drives like a real rig. It also makes a confusing used market — two trucks with the same body can share almost nothing underneath. This guide covers which platforms matter, what interchanges and what only looks like it does, what wears out, and how to buy used without paying clean money for a worn-out build. One honest note: Axial is a modern crawler brand, not a vintage one. New parts are widely available and “rare” almost never means what a seller wants it to mean. Buy Axial to run it.
The Platforms That Matter
SCX10 and SCX10 II: The Scale Truck Standard
The original SCX10 put scale crawling on the map: steel ladder-frame chassis, solid axles, frame-mounted transmission, and bodies that looked like real trucks and Jeeps. It was sold in more variants, wheelbases, and body styles than anyone can list from memory, which is why used listings are so vague — an SCX10 could be an early kit, a later ready-to-run, or a frame with three owners of upgrades inside it.
The SCX10 II was the meaningful redesign, with the AR44 axle in a smaller, more realistic housing, better steering geometry, and a revised transmission layout on many versions. It did not make the original obsolete; the two suit different builds. Decide which you want before shopping, because their axle and link parts largely live in separate lanes.
SCX24: Small Scale, Same Idea
The SCX24 took the formula to 1/24 scale and became the indoor crawler everyone ends up owning. It is genuinely capable for its size, with an enormous upgrade market relative to the truck. Since the trucks are inexpensive new, a used one only makes sense well below new price or with upgrades you actually want. Check the small motor and steering servo carefully — they live the hardest life on this truck.
Wraith and Capra: Rock Racers and Comp Crawlers
The Wraith broke the mold with a tube-style chassis, wide AR60 axles, and a go-fast-as-well-as-crawl attitude. It is bigger, faster, and harder on parts than an SCX10, and it was bought to be driven hard. The Capra took Axial’s performance thinking further: portal axles for clearance, a purpose-built cage chassis, and competition features for drivers who run gates, not just trails. Portal trucks are their own parts world — portal gears, housings, and steering do not interchange with straight-axle trucks and add maintenance points. Buy one for what portals do, not as a simple upgrade.
Parts and Compatibility: Platforms, Not Just Brand Names
Axial is not one compatibility family. It is several platforms sharing a logo, so “Axial crawler parts” on a listing tells you almost nothing. You need the platform, the axle type, and often the wheelbase.
Axles Decide Almost Everything
The wide AR60 axles, the original SCX10 axles, the AR44 from the SCX10 II, and the portal axles each take their own gears, shafts, carriers, knuckles, and housings. Small hardware and bearings may cross over; the parts that cost money do not. If a listing does not name the axle, ask. If the seller cannot name it, price the part as unknown. Steering follows the axle too — the SCX10 II’s better steering was a system of housing, knuckles, and geometry, not a magic part for an earlier truck.
Links, Wheelbase, and the Measurement Trap
Link sets are wheelbase-specific. A kit for a short-wheelbase truck will not correctly locate the axles on a long-wheelbase version, though every link looks identical in a photo. Driveshafts are the same: they come in different lengths and styles across generations, and a shaft a few millimeters off will bind at full droop or pop out at full articulation. Measure links eye to eye and shafts at ride height, and match numbers, not photos. Chassis rails, skids, and transmission mounts follow the generation as well — SCX10 and SCX10 II frames look alike and differ in the details that decide fit. That is the most common honest mistake in the used market.
Bodies and Wheels: The Flexible Layer
Bodies and wheels are the forgiving part. Scale trucks accept a huge range of aftermarket bodies, though wheelbase and fender openings decide whether one looks right. Most 1/10 Axial crawlers use a 12mm hex and 1.9-inch wheels as the common standard, so wheels are easy to shop — just confirm hex size and offset before assuming beadlocks from one truck suit another.
- Buy by platform and axle family first: SCX10, SCX10 II, Wraith, and portal trucks are separate worlds.
- Link sets and driveshafts are wheelbase- and length-specific. Always compare measurements.
- Transmissions and mounts changed between generations that look alike. Verify the generation.
- Bodies and 1.9 wheels are flexible; axles and links are not.
What Wears Out and Breaks First
Crawlers live a slow life, but a gritty, wet, high-torque one. Rod ends are the top consumable: plastic ball ends on links and steering stretch, pop off, and develop slop until the truck wanders. A loose-feeling used Axial usually needs rod ends throughout — cheap, but price it knowing that. Spur gears chew up when grit gets in, transmission gears wear on trucks geared for speed, and driveshaft joints wear oval with real trail miles. Ring and pinion gears suffer when a previous owner ran big tires and a strong motor without maintenance. Clicking under load from an axle is a gear bill coming, not a quirk.
Steering servos are the classic ready-to-run weak point. Stock servos on many models were adequate for stock tires on day one and not much beyond, so a used truck has either a tired servo that buzzes and centers poorly or an upgraded one worth paying a little for. Shocks leak and get sticky, bearings rust if the truck was put away wet, and tire foams break down and go mushy. None of it is fatal; all of it belongs in your price.
Buying Used: Inspection Checklist
- Identify the platform — SCX10, SCX10 II, Wraith, Capra, or SCX24 — and the axle type before pricing it.
- Check for slop: rock the truck by a wheel and wiggle every link. Rod ends are cheap; hidden axle gear wear is not.
- Turn the wheels by hand and listen to each axle and the transmission. Clicking or a tight spot means opening a case.
- Inspect frame and cage: bent steel rails can be straightened; cracked plastic cage sections are replacements.
- Test the servo: steering should center crisply without buzzing or jitter. A weak servo is a near-term expense.
- Squeeze each tire: mushy or waterlogged foams mean opening the wheels, a bigger job on glued tires.
- Value upgrades honestly: a quality servo, metal links, and good beadlocks are worth money; dress-up aluminum mostly is not.
Loose parts are only a bargain when the platform is named and measurements are given. Generic lots are fine for hardware and rod ends, a gamble for gears, shafts, and links. Because Axial parts are still in production and widely stocked new, compare any used price to the new price first — here, new is your ceiling, and sometimes barely above the used ask.
Frequently Asked Questions
Should I buy an SCX10 or an SCX10 II?
For most buyers, the SCX10 II: better steering, tidier axles, strong support. The original makes sense at the right price. Do not buy one planning to convert it into the other — start with the platform you want.
Do Axial parts hold their value like vintage parts?
Generally no, and that is fine. It is a current, supported platform, so parts are worth what they are worth as working parts. Discontinued bodies and early kits have a following, but the everyday market rewards condition, not rarity claims.
What is the first upgrade a used Axial actually needs?
Usually a proper steering servo and fresh rod ends, in that order, before anything shiny. Then tires for your terrain. Power upgrades come last — most Axial trucks are powered adequately for crawling from the start.
Can I mix SCX10 and SCX10 II parts?
Small hardware, yes. Axles, gears, links, and transmission pieces, mostly no — or only with enough modification that it stops being a bolt-on. Keep generations together unless you are deliberately building a hybrid and know the measurements.
Finding parts at ClodMod Racing
Our main bench is vintage RC, but Axial trucks and parts come through regularly, listed by platform so you know whether you are looking at SCX10, SCX10 II, Wraith, or small-scale pieces. Stock varies more than for our vintage brands, so check current listings to catch what is on hand. You can see our current Axial parts here — and if you are stuck on a platform or axle question mid-build, ask. Getting the platform right first is the whole game with this brand.